Marques
shopping_cart
0
APC SRTG6KXLI alimentation d'énergie non interruptible Double-conversion (en ligne) 6 kVA 6000 W 3 sortie(s) CA
Référence : SRTG6KXLI
APC SRTG6KXLI, Double-conversion (en ligne), 6 kVA, 6000 W, Sinus, 100 V, 285 V
5 375,00 €
HT
6 450,00 € TTC
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Cold-start capable
Provides temporary battery power when the utility power is out.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input Power Factor Correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
SmartSlot
Customize UPS capabilities with management cards.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
Serial connectivity
Provides management of the UPS via a serial port.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
LED status indicators
Quickly understand unit and power status with visual indicators.
Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Cold-start capable
Provides temporary battery power when the utility power is out.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input Power Factor Correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
SmartSlot
Customize UPS capabilities with management cards.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
Serial connectivity
Provides management of the UPS via a serial port.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
LED status indicators
Quickly understand unit and power status with visual indicators.
-
Code (IP) Internationale ProtectionIP20
-
SmartSlotOui
-
Connecteur de coupure d'alimentation d'urgenceOui
-
Poids du paquet59 kg
-
Hauteur du colis275 mm
-
Profondeur du colis790 mm
-
Largeur du colis590 mm
-
Alarmes sonoresOui
-
VoyantsOui
-
Poids51,9 kg
-
Profondeur620 mm
-
Largeur440 mm
-
Hauteur178 mm
-
CertificationCE, EN/IEC 62040-1
-
FormatCompact
-
Puissance de sortie6000 W
-
Tension des piles96 V
-
Bouton de coupure d'urgence d'alimentation (EPO)Oui
-
Nombre de port ethernet LAN (RJ-45)1
-
Forme d'ondeSinus
-
Tension de voltage à l'entrée (min)100 V
-
Tension de voltage à l'entrée (max)285 V
-
Le mode ECOOui
-
Démarrage à froidOui
-
Test de batterie automatiqueOui
-
Niveau sonore55 dB
-
Modes d'alarme sonoreAlarme en mode batterie, Alarme de batterie faible, Alarme de surcharge
-
Durée de vie totale de la batterie (max)5 année(s)
-
Fréquence d'entrée40/70 Hz
-
Batterie échangeable à chaudOui
-
Interface sérieOui
-
Port USBOui
-
Taux d'humidité relative (stockage)0 - 95%
-
Type d'écranLCD
-
Taux d'humidité de fonctionnement0 - 95%
-
Types de sortie ACCoupleur C13, Coupleur C19
-
Température hors fonctionnement-15 - 45 °C
-
Altitude de non fonctionnement0 - 15240 m
-
Nombre de prises en sortie3 sortie(s) CA
-
Altitude de fonctionnement0 - 2011 m
-
Temps de rechargement de la batterie4 h
-
Estimation de montée subite d'énergie600 J
-
Température d'opération0 - 40 °C
-
Technologie batterieSealed Lead Acid (VRLA)
-
CouleurNoir
-
capacité de la puissance de sortie6 kVA
-
fréquence de sortie50/60 Hz
-
Tension de sortie THD2%
-
Facteur de crête3:1
-
Tension de voltage à la sortie (max)240 V
-
tension de voltage à la sortie (min)220 V
-
Topologie UPSDouble-conversion (en ligne)
Double-conversion (Online) -
Carte de gestion intégréeOui